A lot of the components are being designed using Autodesk Fusion 360. This creates STL files that can then be fed into a UltiMaker Cura for 3D printing. Rob has done a lot of work using these tools and owns a 3D printer.
As we are replacing all the brake pipes in the MX-5e, we needed a good quality flaring tool.
This is pretty much essential in restoring older cars like the Eunos Roadster as it uses rubber bushes in all the suspension components.
This is pretty much essential in restoring older cars like the Eunos Roadster as it uses rubber bushes in all the suspension components.
This was used to remove the ICE from the MX-5e.
We ended up buying a 10-ton hydraulic bench press because we had so many bushes, ball joints, seals, etc to remove and fit.
We completed a project to build our own vehicle scales.